INTERNATIONAL CONFERENCE ON

MATERIALS

SCIENCE, ENGINEERING & TECHNOLOGY

PAST CONFERENCE

PAST PARTICIPATION STATS

55

Countries

Previous years participants was from more than 55 countries.

387

Participants

More than 387 participant from academia and industries have attended.

189

Organizations

World’s top most organizations that attended previous conferences.

PAST CONFERENCE GALLERY

PAST COMPANY PARTICIPATION

PREVIOUS SPEAKERS

Prof. Roya Maboudian

University of California, Berkeley
United States

Advances in microchemical sensors for environmental and health monitoring

Prof. Jun-Jie Zhu

Nanjing University
China

Biofuel cell self-powered electrochemical biosensor for disease warning and treating

Prof. Tai-Shung Chung

National Taiwan University of Science and Technology
Taiwan

Molecular design of nanocomposite membranes for clean energy applications

Prof. Sumio Iijima

Meijo University
Japan

Audible sound generation from nanomaterials by visible light irradiation

Prof. Reinhard Lipowsky

Max Planck Institute of Colloids and Interfaces
Germany

Remodeling the fluid architecture of biomembranes and nanovesicles

Prof. Benedetto Di Ruzza

University of Foggia
Italy

Radiation hardness characterization of electronic devices and silicon sensors: Case study of the TIFPA-INFN irradiation laboratory in Italy

Prof. Aydogan Ozcan

University of California at Los Angeles
United States

Diffractive optical networks

Prof. Hideomi Koinuma

CEO, SCT, Inc., and Tokyo Institute of Technology
Japan

Combinatorial laser MBE of solid-state nanostructured thin films of functional oxides, polymers, and bio-medical molecules

Prof. Furong Zhu

Director, Crimson Vision Technology Limited and Hong Kong Baptist University
Hong Kong

Multispectral organic photodetectors and applications

Prof. Bing-Huei Chen

Dean, Fu Jen Catholic University
Taiwan

Development of Lycopene Chylomicron into a Botanic Drug: from Bench to Bedside

Prof. Maria Augusta Neto

University of Coimbra
Portugal

Influence of the material and the preparation cavity in the mechanical resistance of restorations with partial dental coverage

Prof. Jin-Rae Cho

Hongik University
South Korea

Numerical characteristic analysis and optimum design of functionally graded cnt-reinforced composites

Prof. Joseph Poon

University of Virginia
United States

High-entropy alloys: A new paradigm for materials discovery?

Prof. Tetsuya Yamamoto

Kochi University of Technology
Japan

The dominant factors that determine carrier transport of less-than-10-nm thick W-doped In2O3 conductive films deposited on glass substrates by reactive plasma deposition with dc arc discharge

Prof. Karol Frohlich

Slovak Academy of Sciences
Slovakia

Enhanced performance of Li-ion batteries with electrodes protected by atomic layer deposition

Prof. Tai-Shung Chung

National University of Singapore
Singapore

Advanced composite membranes for clean water and clean energy

Prof. Vivian WY Tam

Western Sydney University
Australia

Next era on recycled concrete

Prof. Josep Nogues

Catalan Institute of Nanoscience and Nanotechnology (ICN2)
Spain

Magnetoplasmonic nanocapsules as wirelessly controlled nanotherapies

Prof. Sandor Kokenyesi

University of Debrecen
Hungary

Variability of optical parameters in Au-As2S3-polymer-porouz glass matrix nanocomposite

Prof. Yong Zhang

The University of North Carolina at Charlotte
United States

II-VI based organic-inorganic hybrids: Structures, properties, and stability

Prof. Kunichi Miyazawa

Tokyo University of Science
Japan

Structural characterization of the surface of Ni plating films reacted with methane at high temperatures using HRTEM-EELS

Prof. Zibiao Li

A*STAR’s Institute of Sustainability for Chemicals, Energy and Environment
Singapore

Next-gen circular plastic materials towards sustainable applications

Prof. Baowen Li

Southern University of Science and Technology
China

Non-reciprocal heat transfer/thermal diode & its applications in solid state cooling

Prof. Daniel Chen

University of Saskatchewan
Canada

Advance in biomaterials, bioink, and extrusion bioprinting

Prof. Satoshi Kera

National Institutes of Natural Sciences
Japan

Deep insight into organic semiconductors by itinerant characteristics of the electronic structure

Prof. Matjaz Godec

Institute of Metals and Technology
Slovenia

Plasma nitriding of additive manufacturing metallic materials to improve the corrosion and wear resistance

Prof. Juan Carlos Otero

University of Malaga
Spain

About the unexpected structure and properties of molecules bonded to metal nanoclusters

Prof. Luis Cunha

University of Minho
Portugal

Metallic oxide thin films to prevent the aging of organic complex substrates: The case of cork and rubber

Prof. Hiroshi Mizuta

Japan Advanced Institute of Science and Technology
Japan

Graphene-based nanoelectronic devices and NEMS for advanced sensing and nanoscale thermal engineering

Prof. Divij Bhatia

Kyung Hee University
South Korea

Exergaming systems with integrated triboelectric nanogenerators for post-stroke upper-limb rehabilitation

Prof. Hitoshi Tabata

The University of Tokyo
Japan

Spin frustrated and spin wave/magnon system using rare-earth iron garnet films for low energy consumption

Prof. Dong Meng

University of California, Los Angeles
United States

π-conjugated molecular materials

Prof. Seiichi Taguchi

Kobe University
Japan

Sustainable production, properties and biodegradation of lactate-based polymers biosynthesized from renewable carbon sources

Prof. Muresan Alina Crina

Dunarea de Jos University of Galati
Romania

Surface functionalization of zinc with polymers by electrochemical techniques for enhanced properties

Prof. Mariusz Hasiak

Wroclaw University of Science and Technology
Poland

Novel Zr-based bulk metallic glasses with unique physicochemical properties synthesized by innovative processing methods

Prof. Sabine Valange

University of Poitiers
France

Surface-engineered CuO microstructured particles for cavitation bubble assisted catalytic reactions towards energy-efficient sonochemistry

Prof. Zygmunt Sadowski

Wroclaw University of Science and Technology
Poland

Silver and gold nanoparticles as an additive for fabricated packaging material based on nanocellulose and clay minerals

Prof. Rie Umetsu

Tohoku University
Japan

Magnetic properties and electronic structures of fully-compensated ferrimagnet of (Cr,Fe)S with NiAs-type structure

Prof. Jiamin Wang

Chinese Institute of Coal Science
China

Experimental and numerical simulation study on mechanical properties and meso-structural damage of granite under thermal shock

Reeya Garg

Indian Institute of Science Education and Research (IISER) Mohali
India

Origin and the invoking of photoactive Co-N4 centers in Co-N-C for loss-less infusion of highly ORR active palladium in ambient conditions

Prof. Dario Boote

University of Genova
Italy

Re-design of a fast vessel from light alloy to composite material

Dr. Yejin Liang

Gwangju Institute of Science and Technology
South Korea

Lotus Leaf-like superhydrophobic/superoleophilic coating on PVDF nanofiber membrane for water-in-oil emulsion separation

Prof. Masahiro Toyoda

Oita University
Japan

Preparation of porous carbon obtained from HPC solution and investigation of EDLC properties using it as an electrode and its influencing factors

Prof. Slawomir Sek

University of Warsaw
Poland

Functional molecular films of oligourea foldamers

Cecilia Anceschi

University of Florence
Italy

Gold nanoparticles and endothelial progenitor cells: A win-win alliance for targeting tumors

Jaseela Palassery Ithikkal

Institute for Molecular Science
Japan

A charge transport mechanism in organic semiconductor: a PTCDI-C8 thin film

Dr. Jingyun Jiang

Zhengzhou University
China

Designable synthesis of deep eutectic solvents in regulating transition metal-based materials for efficient water splitting

Raj Sekhar Roy

Indian Institute of Science Education and Research (IISER) Mohali
India

Edge-functionalization driven improved charge transfer in covalently interconnected g-C3N4 layers for enhanced photocatalytic hydrogen evolution

Prof. Kimihisa Yamamoto

Tokyo Institute of Technology
Japan

Synthesis of multi-metallic nanoparticles using a dendrimer reactor

Diana Pavlova

Dentaprime Dental Clinic
Bulgaria

Human factors in intraoral 3D scanning in dental practice

Dr. Patrizia Contursi

University Federico II
Italy

Weizmannia coagulans MA-13 as thermophilic biocatalyst for one-step conversion of citrus residues into lactic acid

Dr. Ziedonis Miklasevics

Strate Forest Company "Latvijas Valsts Mezi"
Latvia

The impact of resin tapping technologies before harvesting on the timber strength parameters of scots pine (pinus sylvestris L.)

Prof. Jong-Hyun Lee

Seoul National University of Science and Technology
South Korea

Corrosion behaviors in NaCl and Na2SO2 solutions of Sn-2.5Ag-0.8Cu-0.05Ni-1.0Bi solder alloy

Prof. Supachok Tanpichai

King Mongkut's University of Technology Thonburi
Thailand

Effects of acetylation conditions on properties of chitin nanofibers for extending the shelf life of fresh food products

Dr. Tingting Hong

Changzhou University
China

Construction of DNA nanoflower-modified silica monoliths for capillary electrochromatography chiral separation

Dr. Zekai Hong

National Research Council
Canada

Additive manufacturing for advanced thermal management for aerospace propulsion systems

Prof. Zhongping Liu

Institution of Chemical Materials, China Academy of Engineering Physics
China

Shear thickening fluid microcapsules-filled silicone rubber matrix composites with improved shock-wave attenuation capabilities

Prof. Makoto Suematsu

Keio University and Central Institute for Experimental Animals
Japan

Visualization of reactive sulfur species by SERS imaging predicts invasiveness and chemoresistance of human cancers

Prof. Woei-Shyan Lee

National United University
Taiwan

Nanoindentation behaviour and microstructural evolution of Ta2O5/GaAs thin film with and without annealing

Dr. Elena Stefanova Tatarova

University of Lisbon
Portugal

A versatile plasma machine for synthesis-by-design of graphene and hybrids at a gram-scale

Prof. Masaki Azuma

Tokyo Institute of Technology
Japan

Magnetization reversal by electric field at room temperature in Co substituted bismuth ferrite thin film

Prof. Elena Degoli

University of Modena and Reggio Emilia
Italy

Impact of lithiation on Si-anode/binder interface for next generation Lithium ion batteries

Dr. Will Skene

Montreal University
Canada

Direct polymerization of electroactive monomers on electrodes for developing fully operating devices

Dr. Alexander Lin

National University of Singapore
Singapore

Multi-scale bond behavior between high-performance fiber-reinforced cement-based composites and steel reinforcing bars

Prof. Vassili Karanassios

University of Waterloo-Waterloo Institute of Nanotechnology
Canada

Metallic impurities in graphene oxide employed as a chemo-mechanical material for chemical speciation studies using a battery-operated micro-plasma and a portable, fiber-optic spectrometer

Prof. Gang Xu

Fujian University of Technology
China

Effect of grain boundary engineering on mechanical properties of 321 stainless steel

Prof. Anna Laurenzana

University of Florence
Italy

Yin/Yang effectiveness of gold nanoparticles in controlling tumor progression and promoting vascularization in vasculopathies

Prof. Keiichi Torimitsu

Tohoku University
Japan

Conductive-polymer based fiber-electrode for bioactivity analysis

Dusan Petras

Slovak University of Technology in Bratislava
Slovakia

Materials for radiant heating/cooling systems – test laboratories

Dr. Sergey Sekatskii

EPFL
Switzerland

Electrical excitation of long-range surface plasmons in organic light emitting diode / photonic crystal structure

Prof. Fei Zhuge

Ningbo Institute of Materials Technology and Engineering
China

All-optically controlled memristor

Slawomir Wnuk

Glasgow Caledonian University
United Kingdom

Investigation into thermal energy accumulation inside PV-MTEG structure with use of nano fluids and graphene based thermal energy accumulator

Prof. Joao Roberto Sartori Moreno

Federal Technological University of Parana
Brazil

Study of electric signals in the overlay welding process with pulsed tubular wire in order to determine electric arc stability

Dr. Mathieu G. Silly

Synchrotron SOLEIL
France

Colloidal quantum dots for solar cells and optoelectronic applications studied by high resolution and time-resolved soft X-ray photoemission spectroscopy

Prof. Arata Katayama

Nagoya University
Japan

Proteinaceous materials as extracellular electron mediators for anaerobic microorganisms

CONFERENCE 2023

1st International Conference on Materials Science, Engineering, and Technology

07 – 09 September 2023

Website Link

CONFERENCE 2024

2nd International Conference on Materials Science, Engineering, and Technology

10 – 12 September 2024

Website Link